Reverse cycle · Split · Multi-head · Ducted

Freezing in Tasmania?
Heating & cooling, sorted.

ARCtick-licensed reverse-cycle installs across North West Tasmania, split systems, multi-heads and ducted. Sized properly with a real heat-load calc, mounted straight, piped tidy, commissioned right. Warm winters and cool summers, without the power bill horror.

5.0 · 14 ReviewsReplies in 5 minutesLicensed & Insured

Split, multi-head or ducted? Call and talk it through.

Illustrative: Electripol electrician showing a smiling homeowner her newly installed split system heat pump in the lounge
Google & Facebook
Jeremy and his team went above and beyond, switched our heating to a cheaper tariff, timed our hot water, and recommended a heat pump that cut our heating costs by 30%. Family-first, energy-smart, and genuinely local.

Brenton Crosland

Smithton, TAS

Google & Facebook
Installed our dimmer lights, smoke alarms and updated our switchboard. Great crew, professional, polite and fair on price.

Becky

Smithton, TAS

Licensed & insured

AS/NZ compliant

Smithton based

Family run

5.0 from 14 reviews

Google & Facebook

Replies in 5 minutes

Call or text

Quote in 2 business hours

Fixed price

Before you ring around

The heat pump worries we hear every winter.

“Our split runs flat out and the room's still cold.”

We measure each room and do a proper heat load calculation, so the unit is sized to the room.

“Split, multi-head or ducted? I've no idea.”

We walk you through the options and the running costs before we quote.

“Cheap brands, then nobody can fix them.”

Mitsubishi Electric, Daikin, Fujitsu and Panasonic, brands with local parts and warranty support.

“Will someone else do the refrigerant side?”

No. We hold an ARCtick licence and do the electrical and refrigeration ourselves.

“What happens to the old unit?”

Removed, refrigerant recovered legally and disposed of properly. It's in every replacement quote.

“I don't want pipes all over the wall.”

Straight mounts, tidy line covers and discreet condensate drainage.

Brands we install and service

Sigenergy logoSigenergy
AIKO logoAIKO
Schneider Electric logoSchneider Electric
How it goes

From measuring every room to the first warm night.

Five steps, our own ARCtick licensed crew, and an accurate time estimate before we book.

  1. Illustrative: Electripol electrician measuring a lounge room with a laser measure while chatting with a homeowner holding a mug of tea
    Step 01 · Heat load
    Step 1 · Measure

    Every room measured for the heat pump load.

    We measure, look at insulation, glazing and orientation, then calculate the load. No more, no less than the kW you need.

    • Room by room
    • Ceiling height
    • Insulation and glazing
    • Ceiling height, insulation, glazing and which way the room faces all count, not just square metres.
    • An undersized unit runs flat out. An oversized one short cycles. Sizing it right avoids both.
  2. Illustrative: Electripol electrician marking where the heat pump outdoor unit brackets go while a farmer points at the spot
    Step 02 · System and placement
    Step 2 · Plan

    Split, multi-head or ducted, and where the heat pump goes.

    We walk you through the options and the running costs, talk through where the units go, then quote one all in price.

    • Split or multi-head
    • Ducted with roof space
    • One all in price
    • One room suits a split. Two or three rooms suit a multi-head. Ducted suits the whole home when there's roof space.
    • The price covers supply, install, brackets, disposal and commissioning.
    • We install Mitsubishi Electric, Daikin, Fujitsu and Panasonic, brands we can get parts and warranty support for on the NW coast.
  3. Illustrative: Electripol electrician fitting a white line cover below a heat pump outdoor unit on wall brackets, grinning at someone nearby
    Step 03 · Mount and pipe
    Step 3 · Install

    Heat pump mounted straight, with tidy line covers.

    Straight mounts, proper brackets, tidy line covers and discreet condensate drainage. It looks like it was always meant to be there.

    • Proper brackets
    • Tidy line covers
    • Condensate drainage
    • Electrical, refrigeration, brackets and condensate, all done by our own team.
    • A standard back to back split takes 3 to 5 hours.
    • Longer pipe runs, upstairs installs or multi-head systems take half a day to two days.
  4. Illustrative: Electripol electrician explaining refrigeration gauge readings on a heat pump outdoor unit to a smiling homeowner
    Step 04 · Charge check and leak test
    Step 4 · Commission

    Heat pump commissioned with a charge check and leak test.

    Refrigerant work is done under our own ARCtick licence. We check the charge and leak test the system.

    • ARCtick licensed
    • Charge check
    • Leak test
    • No subcontracting the tricky bits.
    • Replacing a system? The old unit is removed, its refrigerant recovered legally and the lot disposed of properly.
  5. Illustrative: Electripol electrician showing a homeowner the heat pump remote in the lounge
    Step 05 · Remote and winter modes
    Step 5 · Handover

    Heat pump remote paired and winter modes shown.

    Remote paired, and a walkthrough on the modes that save you money in winter.

    • Remote paired
    • Winter modes
    • Running properly
    • We confirm it's running properly before we go.
    • We show you which modes use the least power in winter.
What locals say

The crew behind your heat pump install.

5.0
14 reviews on Google & Facebook
Jeremy and the team did a fantastic job installing down lights, all new power points and light switches, plus a few extras. His recommendation for down lights was spot on, take his advice.
Jane HornsbyCircular Head, TAS · May 2025

1 / 4

What you get

In every heat pump install.

ARCtick licensed refrigerant handling

So the whole job stays with one licensed crew.

Mitsubishi, Daikin, Fujitsu and Panasonic

So you get local warranty support.

Proper heat load sizing

So the unit is sized to your rooms, not a guess.

Split, multi-head and ducted reverse cycle

So the system matches how you use the house.

Tidy pipe runs, proper brackets, condensate done right

So it looks neat and drains properly.

Old unit removal and refrigerant recovery

So the old system is gone and disposed of properly.

Heat pump installs by town: Burnie · Devonport · Ulverstone · Wynyard · Smithton · Stanley

Questions

Heat pump questions, answered honestly.

It depends on room size, ceiling height, insulation, glazing and orientation, not just square metres. We do a proper heat-load calc rather than guessing, so you don't end up with an undersized unit that runs flat-out or an oversized one that short-cycles.

Single-room use: split. Open-plan or 2-3 rooms: multi-head or a larger split with strategic placement. Whole home with existing roof space: ducted. We'll walk you through the trade-offs and running costs before quoting.

Mitsubishi Electric, Daikin, Fujitsu and Panasonic, the brands we can actually get parts and warranty support for on the NW coast. We steer clear of budget brands with no local service network.

Yes, ARCtick refrigerant handling licence held. We do the full job: electrical, refrigeration, brackets, condensate, commissioning. No subcontracting the tricky bits.

Yes, old unit removed, refrigerant recovered legally, and the whole lot disposed of properly. Included in every replacement quote.

Get a quote

Get a proper heating & cooling quote.

Hi, I'm Jeremy.

We're not the biggest sparkies in Tassie.We just want to be the ones you trust enough to ring twice.
5.0 · 14 ReviewsReplies in 5 minutesLicensed & Insured
  • Fixed price quotes

  • On time or we call

  • Tidy site every time

Request a quoteor call 0418 182 724

Quotes back within 2 business hours.

What happens next

  1. 1.We reply within 2 business hours.
  2. 2.We measure up and size the system on site.
  3. 3.You get a fixed price quote in writing.

Prefer to talk? Call 0418 182 724